Cisco SE680 WiMAX, Руководство пользователя

Страница: 19 / 67

19
The Home page
SE680 WiMAX / engbt / SE680_FUG_EN-7 / Basic_configuration.fm / 13.5.11
Schablo
ne 201
1_04
_07
The Home page
Once you have logged in successfully to the SE680 WiMAX modem, you will see the
Home page for the device software. The start screen offers an overview of all areas of
the configuration program:
In the area to the right of the start screen, you will see the connection status of your
SE680 WiMAX modem:

connected = The SE680 WiMAX modem has established a radio connection with
a WiMAX network. You will see the connection duration in brackets and in the for-
mat ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).

disconnected = The SE680 WiMAX modem is trying to establish a connection with
a WiMAX network.
To configure your SE680 WiMAX modem, use the Basic Setup Wizard, which will help
you establish a radio connection.
Connecting to the Internet manually
Once you have configured your Internet access (see page 20 and page 25), you can
establish a manual connection to the Internet on the start screen if you have selected
Connect on demand as the Connection mode.
To establish or end an Internet connection manually:

Open the start screen of the SE680 WiMAX as described on page 15.

If you have already started the user interface, click the Home tab at the top left of
the window.

Click Connect to establish a connection to the Internet.

Click Disconnect if you no longer require the connection.
Menu Description
Basic Setup Wizard Perform the basic configuration and set up the radio
connection to the WiMAX network (

page 20).
Advanced Settings Perform advanced configuration and administration
tasks (

page 23).
Status Obtain information on the status of your SE680 WiMAX
(

page 34).