5-29
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 5 Configuring the Management Interface and Security
Authentication, Authorization, and Accounting
Options
The following options are available:
•
level—
The privilege level for which to enable the command level authorizarion (0, 5, 10,
15)
•
method—
The command authorization methods to be used. You may specify up to two methods, in
the order in which they are to be used.
–
group —
Use authorization.
–
none—
Use no authorization.
How to Specify AAA Command-Level Authorization Methods
From the SCE(config)# prompt, type:
How to Delete the AAA Command-Level Authorization Methods List
From the SCE(config)# prompt, type:
Configuring AAA Accounting
Use this command to enable or disable accounting.
•
How to Enable AAA Accounting, page 5-30
•
How to Disable AAA Accounting, page 5-30
If accounting is enabled, the Cisco SCE platform sends an accounting message to the
server after every command execution. The accounting message is logged in the
server for the use of the network administrator.
By default, accounting is disabled.
Options
The following options are available:
•
level—
The privilege level for which to enable the accounting
Command
Purpose
aaa authorization command
level
default
method1 [method2]
]
Specifies AAA command level authorization
methods.
You may list a maximum of two methods. List
them in the order of priority.
Command
Purpose
no aaa authorization command
level
default
Deletes AAA command level authorization
methods list.
If the command level authorization methods list is
deleted, the default login authentication method
only (enable password) will be used.
authentication will not be used.
