Prisma II EDR Transmitter Overview
OL-32414-01
9
Prisma II EDR Transmitter Overview
The EDR Transmitter with Integrated Transmitter Host Module is a plug-in module
for the Prisma II and Prisma II XD platforms. These modules are part of the Prisma II
optical network, an advanced transmission system designed to optimize network
architectures and increase reliability, scalability, and cost-effectiveness.
The Integrated Host Module installs into a Prisma II XD Chassis directly, or into a
standard Prisma II Chassis by means of a Prisma II host module that accepts up to
two Prisma II High Density application modules. The EDR Transmitter with
Integrated Transmitter Host Module occupies two adjacent application slots in the
Prisma II or Prisma II XD chassis.
The transmitter module contains an optical pluggable module (OPM) connector that
provides inputs for two separate optical receiver circuits.
All connectors are easily accessible. ALARM and Power ON indicators on the front
panel allow you to monitor power and alarm status at a glance.
Transmitter Features
The transmitter has the following key features:
Front panel LEDs indicate alarm and power status
Two RF inputs, each with -20 dB RF test point on front panel
LC/PC optical output connector in an OPM
SC/APC optical output connector on front panel
Plug-and-play capability
Parametric monitoring via companion Prisma II EDR Receiver module
Blind-mate radio frequency (RF) connections on module back panel
Transmitter Status Indicators
The transmitter module has two status indicator LEDs.
Status LED
Indication
Alarm
(red)
ON - A laser fault condition exists.
OFF - The laser is on and functioning with no faults reported.
On
(green)
ON - Power supply is good and module is receiving power.
OFF - Module is not receiving power from the power supply.
