iv
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
Safety Warnings
Before you install the device, observe the safety warnings in this section.
For more information, see
Regulatory Compliance and Safety Information for the Cisco Common
Appliance Model (CAM) Server
.
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units.
Statement 12
Warning
This unit might have more than one power cord. To reduce the risk of electrical shock, disconnect all
power supply cords before servicing the unit.
Statement 106
Warning
This is a Class A Information Product, when used in residential environment, it may cause radio
frequency interference, under such circumstances, the user may be requested to take appropriate
countermeasures.
Statement 257
Warning
Do not attempt to make such connections yourself. Contact the appropriate electric inspection
authority or electrician as appropriate.
Statement 285
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:
Warning
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
Warning
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
