Cisco ONS 15310-MA SDH, Руководство по процедурам

Страница: 584 / 632

18-84
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 18 DLPs H200 to H299
•
Security Level—Select one of the following options:
– noAuthNoPriv—Uses a user name match for authentication.
–
AuthNoPriv—Provides authentication based on the HMAC-MD5 or HMAC-SHA algorithms.
– AuthPriv—Provides authentication based on the HMAC-MD5 or HMAC-SHA algorithms.
Provides DES 56-bit encryption based on the CBC-DES (DES-56) standard, in addition to
authentication.
•
Filter Profile—Select this check box and enter the filter profile name. Traps are sent only if you
provide a filter profile name and create a notification filter. This field is optional and traps can also
be sent without providing a filter profile and create a notification filter. For more information, see
“DLP-H287 Create Notification Filters” task on page 18-85 .
• Proxy Traps Only—If selected, forwards only proxy traps from the ENE. Traps from this node are
not sent to the trap destination identified by this entry.
•
Proxy Tags—Specify a list of tags. The tag list is needed on a GNE only if an ENE needs to send
traps to the trap destination identified by this entry, and wants to use the GNE as the proxy.
Step 4 Click OK to save the information.
Step 5
Return to your originating procedure (NTP).
DLP-H286Delete SNMPv3 Trap Destination
Step 1
In node view, click the Provisioning > SNMP> SNMPv3 > Trap Destination tabs.
Step 2 In the Trap Destinations area, select the trap destination you want to delete.
Step 3
Click Delete . A confirmation dialog box appears.
Step 4
Click Yes .
Step 5
Return to your originating procedure (NTP).
Purpose This procedure deletes an SNMPv3 trap destination.
Tools/Equipment None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite
Security Level Provisioning or higher