Cisco ONS 15310-MA SDH, Руководство по процедурам

Страница: 582 / 632

18-82
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 18 DLPs H200 to H299
–
Password—Enter a password if you select DES.
Step 4 Click OK to save the information.
Step 5
Return to your originating procedure (NTP).
DLP-H283 Create MIB Views
Step 1
In node view, click the Provisioning > SNMP > SNMP V3 > MIB views tabs.
Step 2 Click Create .
Step 3
In the Create Views dialog box, enter the following information:
•
Name—Name of the view.
•
Subtree OID—The MIB subtree which, when combined with the mask, defines the family of
subtrees.
• Bit Mask—A family of view subtrees. Each bit in the bit mask corresponds to a sub-identifier of the
subtree OID.
•
Type—Select the view type. Options are Include and Exclude. Type defines whether the family of
subtrees that are defined by the subtree OID and the bit mask combination are included or excluded
from the notification filter.
Step 4 Click OK to save the information.
Step 5
Return to your originating procedure (NTP).
DLP-H284 Create Group Access
Step 1 In node view, click the Provisioning > SNMP > SNMP V3 > Group Access tabs.
Purpose This procedure creates an SNMPv3 MIB view.
Tools/Equipment None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite
Security Level Provisioning or higher
Purpose This procedure creates a user group and configures the access parameters
for the users in the group.
Tools/Equipment None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite
Security Level Provisioning or higher