18-68
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 18 DLPs H200 to H299
Step 7
Return to your originating procedure (NTP).
DLP-H269 Create a TL1 Tunnel Using the CTC Launcher
Step 1
Double-click the StartCTC.exe file.
Step 2
Click
Use TL1 Tunnel
.
Step 3
In the Open CTC TL1 Tunnel dialog box, enter the following:
•
Far End TID—Enter the TID of the ONS ENE at the far end of the tunnel. The TID is the name
entered in the Node Name field on the node view Provisioning > General tab.
•
Host Name/IP Address—Enter the GNE DNS host name or IP address through which the tunnel will
established. This is the third-party vendor GNE that is connected to an ONS node through an OSI
DCC network. CTC uses TCP/IP over a DCN to reach the GNE. The GNE accepts TL1 connections
from the network and can forward TL1 traffic to the ENEs.
•
Choose a port option:
–
Use Default TL1 Port—Choose this option if you want to use the default TL1 port 3081 and
3082.
–
Use Other TL1 Port—Choose this option if the GNE uses a different TL1 port. Enter the port
number in the box next to the User Other TL1 Port radio button.
•
TL1 Encoding Mode—Choose the TL1 encoding:
–
LV + Binary Payload— TL1 messages are delimited by LV (length value) headers and TCP
traffic is encapsulated in binary form. Cisco recommends this option because it is the most
efficient encoding mode. However, you must verify that the GNE supports LV + Binary Payload
encoding.
–
LV + Base64 Payload— TL1 messages are delimited by LV headers and TCP traffic is
encapsulated using Base64 encoding.
–
Raw—TL1 messages are delimited by semi-columns only, and the TCP traffic is encapsulated
using Base64 encoding.
•
GNE Login Required—Check this box if the GNE requires a a local TL1 ACT-USER login before
forwarding TL1 traffic to ENEs.
•
TID—If the GNE Login Required box is checked, enter the GNE TID.
Step 4
Click
OK
.
Purpose
This task creates a TL1 tunnel using the CTC Launcher, and the tunnel
transports the TCP traffic to and from ONS ENEs through the OSI-based
GNE.
Tools/Equipment
None
Prerequisite Procedures
NTP-H13 Set Up Computer for CTC, page 2-1
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
None
Содержание ONS 15310-MA SDH
Страница 20: ...Figures xx Cisco ONS 15310 MA SDH Procedure Guide Release 9 1 and Release 9 2 78 19416 01 ...
Страница 45: ...xlv Cisco ONS 15310 MA SDH Procedure Guide Release 9 1 and Release 9 2 78 19416 01 Preface ...
Страница 48: ...xlviii Cisco ONS 15310 MA SDH Procedure Guide Release 9 1 and Release 9 2 78 19416 01 Preface ...
Страница 290: ...15 4 Cisco ONS 15310 MA SDH Procedure Guide Release 9 1 and Release 9 2 78 19416 01 Chapter 15 Power Down the Node ...