Cisco ONS 15310-MA SDH, Руководство по процедурам, Страница: 455 / 632

17-49
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 17 DLPs H100 to H199
Step 1
From the View menu, choose Go to Network View . Verify that you can access all the nodes where you
want to add users.
Step 2 Click the Provisioning > Security > Users tabs. Click the user’s name whose settings you want to
change.
Step 3
Click Change . The Change User dialog box appears.
Step 4 In the Change User dialog box, you can:
•
Change a user password
• Modify the user security level
•
Lock out or disable the user
See the “DLP-H38 Create a New User on Multiple Nodes” task on page 16-51 for field descriptions.
Step 5
Click OK . A Change Results confirmation dialog box appears.
Step 6 Click OK to acknowledge the changes.
Step 7
Return to your originating procedure (NTP).
DLP-H146 Delete a User on a Single Node
Note CTC will allow you to delete other Superuser IDs if one Superuser ID remains. For example, you can
delete the CISCO15 user if you have created another Superuser ID. Use this option with caution.
Note
Users who are logged in when you delete them will not be logged out. The delete user action will take
effect after the user logs out. To log out a user who is currently logged in, complete the
“DLP-H148 Log
Out a User on a Single Node” task on page 17-50 .
Step 1
In node view, click the Provisioning > Security > Users tabs.
Step 2 Choose the user you want to delete.
Step 3
In the Delete User dialog box, complete the following:
a. To log the user out before the deleting the user, check Logout before delete .
b.
Click OK .
Step 4 In the User Deletion Results dialog box, click OK .
Purpose This task deletes an existing user from a single node.
Tools/Equipment None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser only