manualshive.com logo in svg

Cisco ONS 15310-MA SDH, Руководство по процедурам, Страница: 403 / 632

Поделиться
Скачать
Cisco ONS 15310-MA SDH Скачать руководство пользователя страница 403

 

16-113

Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2

78-19416-01

Chapter 16      DLPs H1 to H99

Step 7

Return to your originating procedure (NTP).

DLP-H96 Set Auto Refresh Interval for Displayed PM Counts

Step 1

In node view, double-click an electrical, Ethernet, or 15310E-CTX-K9 card. The card view appears.

Note

In an ONS 15310-MA SDH node, the 15310E-CTX-K9 card provides optical ports and the 
E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards provide electrical ports. The ONS 15310-MA 
SDH supports Ethernet cards.

Step 2

Click the 

Performance

 tab.

  •

To set the auto-refresh interval for optical ports click the 

Optical

 tab.

  •

To set the auto-refresh interval for electrical ports click the 

E1, DS3, 

or

 E3 

tabs.

  •

To set the auto-refresh interval for ML-Series and CE-Series Ethernet cards click the 

Ether Ports > 

Statistics

 tabs or 

POS Ports > Statistics

 tabs.

Step 3

Click the Auto-refresh drop-down list and choose one of six options:

  •

None

: This option disables the auto-refresh feature.

  •

15 Seconds

: This option sets the window auto-refresh to 15-second time intervals.

  •

30 Seconds

: This option sets the window auto-refresh to 30-second time intervals.

  •

1 Minute

: This option sets the window auto-refresh to 1-minute time intervals.

  •

3 Minutes

: This option sets the window auto-refresh to 3-minute time intervals.

  •

5 Minutes

: This option sets the window auto-refresh to 5-minute time intervals.

Step 4

Click 

Refresh

. The PM counts for the newly selected auto-refresh time interval appear.

Depending on the selected auto-refresh interval, the displayed PM counts automatically update when 
each refresh interval completes. If the auto-refresh interval is set to None, the displayed PM counts are 
not updated unless you click the Refresh button.

Step 5

Return to your originating procedure (NTP).

Purpose

This task changes the window auto-refresh intervals for updating the 
displayed PM counts.

Tools/Equipment

None

Prerequisite Procedures

DLP-H29 Log into CTC, page 16-43

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Retrieve or higher

Содержание ONS 15310-MA SDH

























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов