Cisco ONS 15310-MA SDH Скачать руководство пользователя страница 390

Страница: 390 / 632

16-100

Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2

78-19416-01

Chapter 16 DLPs H1 to H99

Click

Apply

Step 4

To apply profiles to all ports on a card:

In card view, click the

Force all ports to profile

menu arrow at the bottom of the window.

Choose the new profile from the drop-down list.

Click

Force (still need to “Apply”).

Click

Apply

Step 5

To reapply a previous alarm profile after you have applied a new one, select the previous profile and click

Apply

again.

Step 6

Return to your originating procedure (NTP).

DLP-H82 Apply Alarm Profiles to Cards and Nodes

Step 1

In node view, click the

Provisioning > Alarm Profiles > Alarm Profile Editor

tabs.

Step 2

To apply profiles to a card:

Click the Profile row for the card.

Choose the new profile from the drop-down list.

Click

Apply

Step 3

To apply the profile to an entire node:

Click the

Node Profile

menu arrow at the bottom of the window.

Choose the new alarm profile from the drop-down list.

Click

Apply

Step 4

To reapply a previous alarm profile after you have applied a new one, select the previous profile and click

Apply

again.

Step 5

Return to your originating procedure (NTP).

Purpose

This task applies a custom or default alarm profile to cards or nodes.

Tools/Equipment

None

Prerequisite Procedures

DLP-H79 Create a Cloned Alarm Severity Profile, page 16-96

DLP-H29 Log into CTC, page 16-43

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Содержание ONS 15310-MA SDH

























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ONS 15310-MA SDH

Отзывы:

Cisco ONS 15310-MA SDH, Руководство по процедурам, Страница: 390 / 632

Результаты поиска

Содержание ONS 15310-MA SDH

Отзывы: