manualshive.com logo in svg

Cisco ONS 15310-MA SDH, Руководство по процедурам, Страница: 368 / 632

Поделиться
Скачать
Cisco ONS 15310-MA SDH Скачать руководство пользователя страница 368

 

16-78

Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2

78-19416-01

Chapter 16      DLPs H1 to H99

28 VC-12 circuits. In general, creating VC low-order path tunnels is a good idea if you are creating 
many VC low-order path circuits from the same source and destination. Refer to the “Circuits and 
Tunnels” chapter in the 

Cisco ONS 15310-MA SDH Reference Manual

 for more information.

  •

Create VC low-order path aggregation point—This option is available if the circuit source or 
destination is on an STM-M port on a 1+1 or unprotected node. VAPs aggregate circuits onto an VC 
high-order path for handoff to non-ONS networks or equipment, such as an IOF, switch, or digital 
access and cross-connect system (DACS). It allows VC-12 circuits to be routed through the node 
using one VC high-order path connection on the 15310-MA-CTX (cross-connect) card matrix rather 
than multiple VC low-order path connections on the 15310-MA-CTX card VC low-order path 
matrix. If you want to aggregate the circuit you are creating with others onto an VC high-order path 
for transport outside the ONS network, choose one of the following:

  –

 VC high-order path grooming node is 

source node

, VC low-order path grooming node is

 

destination node

—Creates the VAP on the circuit source node. This option is available only if 

the circuit originates on an STM-M port.

  –

 VC high-order path grooming node is 

destination node

, VC low-order path grooming node is

 

source node—

Creates the VAP on the circuit destination node. This option is available only if 

the circuit terminates on an STM-M port.

  •

None—Choose this option if you do not want to create a VC low-order path tunnel or a VAP. This 
is the only available option if CTC cannot create a VC low-order path tunnel or VAP.

Step 2

Return to your originating procedure (NTP).

DLP-H60 Provision a E1, DS-3, or E3 Circuit Route

Step 1

In the Route Review and Edit area of the Circuit Creation wizard, click the source node icon if it is not 
already selected.

Step 2

Starting with a span on the source node, click the arrow of the span you want the circuit to travel. The 
arrow turns white. In the Selected Span area, the From and To fields display span information. The 
source VC high-order path and VC low-order path appear. 

  •

Add two spans for all path protection or unprotected portions of the circuit route from the source to 
the destination.

  •

Add one span for all 1+1 portions of the route from the source to the destination.

  •

For circuits routed on path protection dual ring interconnect topologies, provision the working and 
protect paths as well as the spans between the DRI nodes. 

Purpose

This task provisions the circuit route for manually routed E1, DS-3, or E3 
circuits.

Tools/Equipment

None

Prerequisite Procedures

DLP-H29 Log into CTC, page 16-43

The Circuit Creation wizard Route Review and Edit page must be open.

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Содержание ONS 15310-MA SDH

























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов