Cisco Nexus C9316D-GX, Руководство по установке оборудования

Страница: 42 / 52

Quantity Weight per Unit Component
2 (1 for operations and 1 for
redundancy) —
2.42 lb (1.1 kg)
Power Supply module
– 1100-W AC port-side exhaust
(blue) (NXA-PAC-1100W-PE2)
– 1100-W AC port-side intake
(burgundy)
(NXA-PAC-1100W-PI2)
– 1100-W HVAC/HVDC port-side
exhaust (blue)
(NXA-PUV-1100W-PE)
– 1100-W HVAC/HVDC port-side
intake (burgundy)
(NXA-PUV-1100W-PI)
– 1100-W DC port-side exhaust
(blue) (NXA-PDC-1100W-PE)
– 1100-W DC port-side intake
(burgundy) (NXA-PDC-1100W-PI)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see https://www.cisco.com/
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html .
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html .
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Some power supplies have UL listed capabilities that are greater than the maximum power requirements for
a switch. To determine the power consumption characteristics for the switch, use the typical and maximum
requirements that are listed in the following table. Note
Heat Dissipation
Requirement Maximum Power
Consumption (AC or DC) Typical Power
Consumption (AC or DC) Switch
3,466.22 BTUs per hour 1010 W 420 W Cisco Nexus C9316D-GX
Cisco Nexus C9316D-GX ACI-Mode Switch Hardware Installation Guide
34
System Specifications
Transceiver and Cable Specifications