Cisco Nexus 7000 Series, Справочник по командам

Страница: 889 / 1018

show role
To display the user role configuration, use the show role command.
show role [ name role-name ]
Syntax Description
(Optional) Displays information for a specific user
role name. The role name is case sensitive. name role-name
Command Default
Displays information for all user roles.
Command Modes
Any command mode
Command History
Modification Release
This command was introduced. 4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display information for a specific user role:
switch(config)#
show role name MyRole
role: MyRole
description: new role
vlan policy: deny
permitted vlan
1-10
interface policy: deny
permitted interface
Ethernet2/1-8
vrf policy: permit (default)
This example shows how to display information for all user roles in the default virtual device context (VDC):
switch(config)#
show role
role: network-admin
description: Predefined network admin role has access to all commands
on the switch
-------------------------------------------------------------------
Rule
Perm Type Scope Entity
-------------------------------------------------------------------
1
permit read-write
role: network-operator
description: Predefined network operator role has access to all read
commands on the switch
-------------------------------------------------------------------
Rule
Perm Type Scope Entity
-------------------------------------------------------------------
Cisco Nexus 7000 Series Security Command Reference
863
Show Commands
show role