Cisco Nexus 7000 Series Скачать руководство пользователя страница 835

Страница: 835 / 1018

show ipv6 access-lists

To display all IPv6 access-control lists (ACLs) or a specific IPv6 ACL, use the

show ipv6 access-lists

command.

show ipv6 access-lists

[

access-list-name

] [

expanded| summary

]

Syntax Description

(Optional) Name of an IPv6 ACL, which can be up
to 64 alphanumeric, case-sensitive characters.

access-list-name

(Optional) Specifies that the contents of IPv6 address
groups or port groups show rather than the names of
object groups only.

expanded

(Optional) Specifies that the command displays
information about the ACL rather than the ACL
configuration. For more information, see the

“

Usage

Guidelines

”

section.

summary

Command Default

None

Command Modes

Any command mode

Command History

Modification

Release

Command output is sorted alphabetically by the ACL names.

Support was added for the

fragments

command.

4.2(1)

This command was introduced.

4.1(2)

Usage Guidelines

The device shows all IPv6 ACLs, unless you use the

access-list-name

argument to specify an ACL.

If you do not specify an ACL name, the device lists ACLs alphabetically by the ACL names.

IPv6 address object groups and IP port object groups show only by name, unless you use the

expanded

keyword.

The

expanded

keyword allows you to display the details of object groups used in an ACL rather than only

the name of the object groups. For more information about object groups, see the

object-group ipv6 address

and

object-group ip port

commands.

The

summary

keyword allows you to display information about the ACL rather than the ACL configuration.

The information displayed includes the following:

Cisco Nexus 7000 Series Security Command Reference

809

Show Commands

show ipv6 access-lists

Содержание Nexus 7000 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Nexus 7000 Series

Отзывы:

Похожие инструкции для Nexus 7000 Series

Бренды по названию

Популярные бренды

Cisco Nexus 7000 Series, Справочник по командам

Результаты поиска

Содержание Nexus 7000 Series

Отзывы:

Похожие инструкции для Nexus 7000 Series

Бренды по названию

Популярные бренды