Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 71 / 660

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
1-23
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring the Switch
Using Switch File Systems
Setting the Current Directory
The cd command changes the current directory level to a specified directory level. The CLI defaults to
the volatile: file system. This command expects a directory name input.
Any file saved in the volatile: file system is erased when the switch reboots.
The syntax for this command is cd directory name .
This command exchanges the current directory to the root directory on the bootflash: file system:
switch# cd bootflash:
This example changes the current directory to the mystorage directory that resides in the current
directory:
switch# cd mystorage
Displaying the Current Directory
The pwd command displays the current directory location. This example changes the directory and
displays the current directory:
switch# cd bootflash:
switch# pwd
bootflash:
Listing the Files in a Directory
The dir command displays the contents of the current directory or the specified directory. The syntax
for this command is dir directory or dir filename .
This example shows how to list the files on the default volatile: file system:
switch#
dir
Usage for volatile: filesystem
0 bytes total used
20971520 bytes free
20971520 bytes available
Creating a Directory
The mkdir command creates a directory at the current directory level or at a specified directory level.
The syntax for this command is mkdir directory name .
This example creates a directory called test in the bootflash: directory.
switch#
mkdir bootflash:test
This example creates a directory called test at the current directory level.
switch# mkdir test