manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 578 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 578

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-12

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Advanced Fibre Channel Features and Concepts

Switch Interoperability

Step 3

Change the Fibre Channel timers (if they have been changed from the system defaults). 

Note

The Cisco Nexus 5000 Series, Brocade, and McData FC Error Detect (ED_TOV) and Resource 
Allocation (RA_TOV) timers default to the same values. They can be changed if needed. The 
RA_TOV default is 10 seconds, and the ED_TOV default is 2 seconds. Per the FC-SW2 standard, 
these values must be the same on each switch within the fabric. 

switch(config)# 

fctimer e_d_tov ?

<1000-100000>

E_D_TOV in milliseconds(1000-100000)

switch(config)# 

fctimer r_a_tov ?

<5000-100000>

R_A_TOV in milliseconds(5000-100000)

Step 4

When making changes to the domain, you may or may not need to restart the domain manager function 
for the altered VSAN. 

•

Force a fabric reconfiguration with the 

disruptive

 option.

switch(config)# 

fcdomain restart disruptive vsan 1

or

 

•

Do not force a fabric reconfiguration.

switch(config#

 fcdomain restart vsan 1

Verifying Interoperating Status

This section highlights the commands used to verify if the fabric is up and running in interoperability 
mode.

To verify the resulting status of entering the interoperability command in any switch in the Cisco Nexus 
5000 Series, perform this task:

Step 1

Verify the software version.

switch# 

show version

 

Cisco Storage Area Networking Operating System (SAN-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2007, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software may be covered under the GNU Public

License or the GNU Lesser General Public License. A copy of

each such license is available at

http://www.gnu.org/licenses/gpl.html and

http://www.gnu.org/licenses/lgpl.html

Software

BIOS:

version

kickstart: version 4.0(0) [build 4.0(0.308)] [gdb]

system:

version 4.0(0) [build 4.0(0.308)] [gdb]

BIOS compile time:

kickstart image file is: bootflash:///nuova-or-kickstart-nsg.0.1.0.001.bin

kickstart compile time:

10/12/2020 25:00:00 [02/22/2008 13:05:46]

system image file is:

bootflash:/nuova-or-system-nsg.0.1.0.001.bin

system compile time:

10/22/2007 14:00:00 [02/22/2008 14:19:45]

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов