manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 561 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 561

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-9

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Managing FLOGI, Name Server, FDMI, and RSCN Databases

RSCN

Locking the Fabric

The first action that modifies the database creates the pending database and locks the feature in the 
VSAN. Once you lock the fabric, the following situations apply:

•

No other user can make any configuration changes to this feature.

•

A copy of the configuration database becomes the pending database along with the first active 
change. 

Committing the RSCN Timer Configuration Changes

If you commit the changes made to the active database, the configuration is committed to all the switches 
in the fabric. On a successful commit, the configuration change is applied throughout the fabric and the 
lock is released.

To commit RSCN timer configuration changes, perform this task:

Discarding the RSCN Timer Configuration Changes

If you discard (abort) the changes made to the pending database, the configuration database remains 
unaffected and the lock is released.

To discard RSCN timer configuration changes, perform this task:

Clearing a Locked Session

If you have changed the RSCN timer configuration and have forgotten to release the lock by either 
committing or discarding the changes, an administrator can release the lock from any switch in the 
fabric. If the administrator performs this task, your changes to the pending database are discarded and 
the fabric lock is released.

Tip

The pending database is only available in the volatile directory and are subject to being discarded if the 
switch is restarted.

To use administrative privileges and release a locked DPVM session, use the

 clear rscn session vsan 

command in EXEC mode. The following example shows how to clear the RSCN session for VSAN 10:

switch# 

clear rscn session vsan 10

Command

Purpose

Step 1

switch# 

configuration terminal 

switch(config)# 

Enters configuration mode.

Step 2

switch(config)# 

rscn commit vsan 

timeout

Commits the RSCN timer changes.

Command

Purpose

Step 1

switch# 

configuration terminal 

switch(config)# 

Enters configuration mode.

Step 2

switch(config)# 

rscn abort vsan 

timeout

Discards the RSCN timer changes and clears the 
pending configuration database.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов