manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 521 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 521

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-21

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring and Managing Zones

Enhanced Zoning

If the fabric is locked by another user and for some reason the lock is not cleared, you can force the 
operation and close the session. You must have permission (role) to clear the lock in this switch and 
perform the operation on the switch from where the session was originally created.

To commit or discard changes to the zoning database in a VSAN, perform this task:

Releasing Zone Database Locks

To release the session lock on the zoning database on the switches in a VSAN, use the 

no zone commit 

vsan 

command from the switch where the database was initially locked.

switch# 

configuration terminal

switch(config)# 

no zone commit vsan 2

If session locks remain on remote switches after using the 

no zone commit vsan 

command, you can use 

the 

clear zone lock vsan

 command on the remote switches.

switch# 

clear zone lock vsan 2

Note

We recommend using the 

no zone commit vsan 

command first to release the session lock in the fabric. 

If that fails, use the 

clear zone lock vsan

 command on the remote switches where the session is still 

locked.

Command

Purpose

Step 1

switch# 

configuration terminal 

switch(config)# 

Enters configuration mode.

Step 2

switch(config)# 

zone commit vsan 

vsan-id

 

No pending info found

Applies the changes to the enhanced zone database 
and closes the session.

switch(config)# 

zone commit vsan 

vsan-id

 

force

Forcefully applies the changes to the enhanced 
zone database and closes the session created by 
another user.

switch(config)# 

no

 

zone commit vsan 

vsan-id

Discards the changes to the enhanced zone 
database and closes the session.

switch(config)# 

no

 

zone commit vsan 

vsan-id

 

force

Forcefully discards the changes to the enhanced 
zone database and closes the session created by 
another user.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов