manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 493 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 493

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-5

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring and Managing VSANs

Configuring VSANs

Figure 1-3

VSANS with Zoning

Configuring VSANs

VSANs have the following attributes:

•

VSAN ID—The VSAN ID identifies the VSAN as the default VSAN (VSAN 1), user-defined 
VSANs (VSAN 2 to 4093), and the isolated VSAN (VSAN 4094).

•

State—The administrative state of a VSAN can be configured to an active (default) or suspended 
state. Once VSANs are created, they may exist in various conditions or states. 

–

The active state of a VSAN indicates that the VSAN is configured and enabled. By enabling a 
VSAN, you activate the services for that VSAN.

–

The suspended state of a VSAN indicates that the VSAN is configured but not enabled. If a port 
is configured in this VSAN, it is disabled. Use this state to deactivate a VSAN without losing 
the VSAN’s configuration. All ports in a suspended VSAN are disabled. By suspending a 
VSAN, you can preconfigure all the VSAN parameters for the whole fabric and activate the 
VSAN immediately.

•

VSAN name—This text string identifies the VSAN for management purposes. The name can be 
from 1 to 32 characters long and it must be unique across all VSANs. By default, the VSAN name 
is a concatenation of VSAN and a four-digit string representing the VSAN ID. For example, the 
default name for VSAN 3 is VSAN0003.

Note

A VSAN name must be unique.

•

Load-balancing attributes—These attributes indicate the use of the source-destination ID 
(src-dst-id) or the originator exchange OX ID (src-dst-ox-id, the default) for load-balancing path 
selection. 

This section describes how to create and configure VSANs and includes the following topics:

•

About VSAN Creation, page 1-6

Physical Topology

VSAN 2

VSAN 7

AS2

AS1

SA2

SA3

AS3

Zone A

Zone A

Zone C

Zone D

Zone B

H2

H1

SA1

SA4

H3

79534

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов