manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 357 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 357

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-17

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Smart Call Home

Additional References

Table 1-6

 describes the common event message format for full text or XML.

Table 1-5

Common Fields for All Full Text and XML Messages

Data Item
(Plain Text and XML)

Description
(Plain Text and XML)

XML Tag 
(XML Only)

Time stamp

Date and time stamp of event in ISO time notation:

YYYY-MM-DD

 

HH:MM:SS GMT+HH:MM

.

/aml/header/time

Message name

Name of message. Specific event names are listed in the 

Table 1-4

.

/aml/header/name

Message type

Name of message type, such as reactive or proactive.

/aml/header/type

Message group

Name of alert group, such as syslog.

/aml/header/group

Severity level

Severity level of message (see 

“Call Home Message Levels” section on 

page 1-5

). 

/aml/header/level

Source ID

Product type for routing. Specifically Catalyst 6500.

/aml/header/source

Device ID

Unique device identifier (UDI) for end device that generated the 
message.   This field should be empty if the message is nonspecific to a 
device. The format is 

type

@

Sid

@

serial.

•

type

 is the product model number from backplane IDPROM.

•

@

 is a separator character.

•

Sid 

is C, identifying the serial ID as a chassis serial number·

•

serial

 is the number identified by the Sid field.

An example is WS-C6509@C@12345678

/aml/ header/deviceId

Customer ID

Optional user-configurable field used for contract information or other 
ID by any support service.

/aml/ header/customerID

Contract ID

Optional user-configurable field used for contract information or other 
ID by any support service.

/aml/ header /contractId

Site ID

Optional user-configurable field used for Cisco-supplied site ID or 
other data meaningful to alternate support service.

/aml/ header/siteId

Server ID

If the message is generated from the device, this is the unique device 
identifier (UDI) of the device. 

The format is 

type

@

Sid

@

serial.

•

type

 is the product model number from backplane IDPROM.

•

@

 is a separator character.

•

Sid 

is C, identifying the serial ID as a chassis serial number·

•

serial

 is the number identified by the Sid field.

An example is WS-C6509@C@12345678

/aml/header/serverId

Message description Short text that describes the error. 

/aml/body/msgDesc

Device name

Node that experienced the event (host name of the device).

/aml/body/sysName

Contact name

Name of person to contact for issues associated with the node that 
experienced the event.

/aml/body/sysContact

Contact e-mail

E-mail address of person identified as the contact for this unit.

/aml/body/sysContactEmail

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов