manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 305 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 305

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-13

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Using Cisco Fabric Services

Configuring CFS Over IP

To enable or disable CFS over IPv4, perform this task:

To enable or disable CFS over IPv6, perform this task:

Verifying the CFS Over IP Configuration

To verify the CFS over IP configuration, use the

 show cfs status 

command.

switch# 

show cfs status

Distribution : Enabled

Distribution over IP : Enabled - mode IPv4

IPv4 multicast address : 239.255.70.83

IPv6 multicast address : ff15::efff:4653

Configuring IP Multicast Address for CFS over IP

All CFS over IP enabled switches with similar multicast addresses form one CFS over IP network. CFS 
protocol-specific distributions, such as the keepalive mechanism for detecting network topology 
changes, use the IP multicast address to send and receive information. 

Note

CFS distributions for application data use directed 

unicast.

You can configure a CFS over IP multicast address value for either IPv4 or IPv6. The default IPv4 
multicast address is 239.255.70.83 and the default IPv6 multicast address is ff13:7743:4653.

Command

Purpose

Step 1

switch# 

configure

switch(config)#

Enters configuration mode.

Step 2

switch(config)# 

cfs ipv4 distribute

Globally enables CFS over IPv4 for all applications 
on the switch.

switch(config)# 

no cfs ipv4 distribute

Disables (default) CFS over IPv4 on the switch.

Command

Purpose

Step 1

switch# 

configure

switch(config)#

Enters configuration mode.

Step 2

switch(config)# 

cfs ipv6 distribute

Globally enables CFS over IPv6 for all applications 
on the switch.

switch(config)# 

no cfs ipv6 distribute

Disables (default) CFS over IPv6 on the switch.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов