manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 224 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 224

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-6

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring AAA

Prerequisites for Remote AAA

Prerequisites for Remote AAA

Remote AAA servers have the following prerequisites:

•

At least one RADIUS or  server must be IP reachable (see the 

“Configuring RADIUS 

Server Hosts” section on page 1-5

 and the 

“Configuring Server Hosts” section on 

page 1-6

)

•

The Nexus 5000 Series switch is configured as a client of the AAA servers.

•

The preshared secret key is configured on the Nexus 5000 Series switch and on the remote AAA 
servers.

•

The remote server responds to AAA requests from the Nexus 5000 Series switch (see the 

“Manually 

Monitoring RADIUS Servers or Groups” section on page 1-14

 and the 

“Manually Monitoring 

Servers or Groups” section on page 1-13

).

AAA Guidelines and Limitations

The Nexus 5000 Series switches do not support all numeric usernames, whether created with  
or RADIUS, or created locally, and do not create local users with all numeric names. If an all numeric 
username exists on an AAA server and is entered during login, the Nexus 5000 Series switch will log in 
the user.

Configuring AAA

To configure AAA authentication and accounting, perform this task:

Step 1

If you want to use remote RADIUS or  servers for authentication, configure the hosts on your 
Nexus 5000 Series switch. See 

Chapter 1, “Configuring RADIUS”

 and 

Chapter 1, “Configuring 

.”

Step 2

Configure console login authentication methods. See the 

“Configuring Console Login Authentication 

Methods” section on page 1-7

.

Step 3

Configure default login authentication methods for user logins. See the 

“Configuring Default Login 

Authentication Methods” section on page 1-8

Step 4

Configure default AAA accounting default methods. See the 

“Configuring AAA Accounting Default 

Methods” section on page 1-10

.

The following topics describe the AAA configuration procedure in more details:

•

Configuring Console Login Authentication Methods, page 1-7

•

Configuring Default Login Authentication Methods, page 1-8

•

Enabling Login Authentication Failure Messages, page 1-9

•

Enabling MSCHAP Authentication, page 1-9

•

Configuring AAA Accounting Default Methods, page 1-10

•

Using AAA Server VSAs with Nexus 5000 Series Switches, page 1-11

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов