Adding the NSS to your Network
Editing Access Control Lists (ACLs) from Windows Explorer: Restrictions
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
32
3
Editing Access Control Lists (ACLs) from Windows Explorer:
Restrictions
Access Control Lists (ACLs) are used to set user and group access privileges for
specific files and folders stored on the NSS. There are certain restrictions to be
aware of as you work with ACLs through Windows Explorer:
•
Group versus User ACLs
: You can only set up an ACL for individual users.
You cannot set up a group ACL.
•
NIS domain
: You cannot create or edit ACLs for NIS domain users; they do
not appear in the Security tab in Windows Explorer.
Running Diagnostics of your Physical Link from the
Configuration Interface
The NSS lets you test the physical network cable attached to the Ethernet link for
certain fault conditions. You can either run the test through the Configuration
Interface or from the LCD panel on the front of the chassis. The test automatically
runs each time you display the Network Diagnostics page or when you display the
Ethernet Cable screen from the LCD. Running this test does not affect the use of
the link in any way.
NOTE
The diagnostics test is only supported when the NSS is connected to a Gigabit
Ethernet switch.
To test the physical link from the Configuration Interface:
STEP 1
From the
Manager Menu
, click
Network
Diagnostics
.
The
Network Diagnostics
page appears.
