Managing the NSS
Saving the Current Configuration
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
60
7
Saving the Current Configuration
You can save a copy of the NSS configuration that can be used if you need to
restore the settings at a later time. When you save the configuration file, it saves a
date-stamped version of the current configuration settings to the specified volume
on the NSS. You can choose to save the current configuration settings to a
specified volume on the NSS or you can save the file to a USB flash device
inserted into the AUX-1 port.
NOTE
If you restore a configuration file that was saved in an older version of the NSS
firmware than the current version, check the settings after you restore the file to
ensure they were updated correctly.
To save the current configuration:
STEP 1
If you are saving the configuration file to a USB flash device, insert a USB flash
device into the AUX-1 port on the NSS chassis.
STEP 2
From the
Manager Menu
, click
Admin
Configuration
.
The
Configuration Manager
page appears.
