Description
Field
Specifies whether an FPD upgrade or downgrade is
required. A downgrade is required in rare cases when
the version of the FPD image has a higher major
revision than the version of the FPD image in the
current Cisco IOS XR software package.
Upg/Dng?
show fpd package Command Output: Example
Use the
show fpd package
command in administration EXECsystem admin exec mode to find out which
SPAs and SIPs are supported with your current Cisco IOS XR software release, which FPD image package
you need for each SPA or SIP, and what the minimum hardware requirements are for each module. If multiple
FPD images are available for your card, they are listed as Subtype fpga2, fpga3, and so on.
The following example shows sample output from the
show fpd package
command:
sysadmin_vm:0_RP1 # show fpd package
PROTO-CXP-2XPITA
BAO-MB FPGA
NO
1.00
1.00
0.0
Slice-0 GN2411
YES
3.01
3.01
2.0
Slice-1 GN2411
YES
3.01
3.01
2.0
Slice-0 GN2411
YES
2.07
2.07
0.0
Slice-1 GN2411
YES
2.07
2.07
0.0
CCC FPGA
YES
1.14
1.14
0.0
CCC Power-On
YES
1.30
1.30
0.0
Ethernet Switch
YES
1.32
1.32
0.0
BIOS FPD
YES
9.10
9.10
0.0
SB Certificates
NO
1.00
1.00
0.0
--------------------------------------------------------------------------------
NC6-FANTRAY
Fantray FPGA
NO
2.01
2.01
0.0
--------------------------------------------------------------------------------
PWR-3KW-AC-V2
DT-PriMCU
NO
6.01
6.01
1.0
DT-Sec54vMCU
NO
6.01
6.01
1.0
DT-Sec5vMCU
NO
6.03
6.03
1.0
EM-Sec54vMCU
NO
3.08
3.08
0.21
EM-Sec5vMCU
NO
3.06
3.06
0.21
--------------------------------------------------------------------------------
PWR-2KW-DC-V2
DT-PriMCU
NO
6.02
6.02
0.12
DT-Sec54vMCU
NO
6.02
6.02
0.12
DT-Sec5vMCU
NO
6.02
6.02
0.12
EM-PriMCU
NO
3.06
3.06
0.21
EM-Sec54vMCU
NO
3.09
3.09
0.21
EM-Sec5vMCU
NO
3.07
3.07
0.21
--------------------------------------------------------------------------------
NC6-10X100G-L-K
BAO-MB FPGA
NO
1.00
1.00
0.0
BAO-DB FPGA
NO
1.00
1.00
0.0
S2 GN2411
YES
3.01
3.01
2.0
S3 GN2411
YES
3.01
3.01
2.0
S4 GN2411
YES
3.01
3.01
2.0
S2 GN2411
YES
2.07
2.07
0.0
S3 GN2411
YES
2.07
2.07
0.0
S4 GN2411
YES
2.07
2.07
0.0
CCC FPGA
YES
1.14
1.14
0.0
CCC Power-On
YES
1.30
1.30
0.0
Ethernet Switch
YES
1.32
1.32
0.0
BIOS FPD
YES
9.10
9.10
0.0
SB Certificates
NO
1.00
1.00
0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-K
BAO-MB FPGA
NO
1.00
1.00
0.0
BAO-DB FPGA
NO
1.00
1.00
0.0
S2 GN2411
YES
3.01
3.01
2.0
S3 GN2411
YES
3.01
3.01
2.0
S4 GN2411
YES
3.01
3.01
2.0
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
114
Upgrading FPD
show fpd package Command Output: Example
