manualshive.com logo in svg

Cisco NCS 5000 Series, Руководство пользователя

Продукт Cisco NCS 5000 Series предлагает бесплатное скачивание руководства по установке оборудования. Руководство по аппаратной установке можно загрузить с сайта {веб-сайт}. Настройте свою сеть с помощью этого руководства, чтобы улучшить производительность и эффективность вашего оборудования.

Поделиться
Скачать
background image

•

A line card chassis is added to an existing CRS multi-chassis router.

•

A non-reload software maintenance upgrade (SMU) or PIE installation is performed, even where the
FPD image version changes. Since a non-reload installation is, by definition, not supposed to reload the
router, and an FPD upgrade requires a router reload, the automatic FPD upgrade is repressed.

In all cases where the automatic FPD upgrade is not performed, you must perform a manual FPD upgrade
using the

upgrade hw-module fpd

command.

Note

FPD auto-upgrade can be enabled and disabled. When auto FPD is enabled, it automatically updates FPDs
when a SMU or image changes, including an updated firmware revision. Use the

fpd auto-upgrade

command

to disable or enable auto-fpd.

How to Upgrade FPD Images

You must determine if an FPD image upgrade is needed using the

show hw-module fpd

command and

perform the upgrade, if you migrate the software to a later Cisco IOS XR software release

In the event that there is an FPD incompatibility with your card, you may receive an error message. If you
upgrade to a newer version of the Cisco IOS XR software and there is an FPD incompatibility, you receive
the following message:

LC/0/1/CPU0:Dec 23 16:33:47.945 : spa_192_jacket_v2[203]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV

: spa fpga2 instance 0 is down-rev (V0.6), upgrade to (V1.0). Use the "upgrade hw-module

fpd" CLI in admin mode.

If the FPD image on the card is newer then what is required by the currently running Cisco IOS XR software
image on the router, you receive the following error message:

LC/0/1/CPU0:Dec 23 16:33:47.955 : spa_192_jacket_v2[203]: %PLATFORM-UPGRADE_FPD-4-UP_REV :

spa fpga instance 1 is severely up-rev (V2.1), downgrade to (V1.6). Use the "upgrade hw-module

fpd" CLI in admin mode.

You should perform the FPD upgrade procedure if you receive such messages. Cards may not function properly
if FPD incompatibilities are not resolved.

An error message is displayed (as shown below) when version-34 of FPGA is upgraded to version-37.
This is only for CRS-X linecards. However, when the user upgrades to version-37, from any other lower
version (other than version-34), this failure message is not displayed. Even though we see this failure
message ,FPD upgrade will complete successfully and after a power cycle/reload it will properly reflect
the upgraded version. There is no functionality impact.

FAILED to upgrade fpga3 for 4-100GbE on location1/1/CPU0 from 34.00 to 37.00
LC/1/1/CPU0:Nov 12 15:28:40.057 : lc_fpd_upgrade[244]: %PLATFORM-UPGRADE_FPD-3-
OPERATION_FAILED : Failed to update FPD

:FPD Programming action failed on this card.

Note

The use of the

force

option when performing a FPD upgrade is not recommended except under explicit

direction from Cisco engineering or TAC.

Note

System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x    

109

Upgrading FPD

How to Upgrade FPD Images

Содержание NCS 5000 Series





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NCS 5000 Series

4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Бренд: 4RF Страницы: 7
F5 WANJet 500 Quick Start Card preview
WANJet 500
Бренд: F5 Страницы: 2
F5 ARX-500 Hardware Reference Manual preview
ARX-500
Бренд: F5 Страницы: 90
F5 ARX-4000 Parts Replacement Manual preview
ARX-4000
Бренд: F5 Страницы: 47
National Instruments NI 9871 Operating Instructions Manual preview
NI 9871
Бренд: National Instruments Страницы: 24
National Instruments NI 9478 Operating Instructions Manual preview
NI 9478
Бренд: National Instruments Страницы: 32
National Instruments FIELDPOINT FP-1600 Operating Instructions Manual preview
FIELDPOINT FP-1600
Бренд: National Instruments Страницы: 8
Patton electronics Patton SmartNode 2300 Series Specification Sheet preview
Patton SmartNode 2300 Series
Бренд: Patton electronics Страницы: 2
Paradyne 8540 Installation Instructions Manual preview
8540
Бренд: Paradyne Страницы: 12
TE Connectivity InterReach Fusion ADCP-77-044 Manual preview
InterReach Fusion ADCP-77-044
Бренд: TE Connectivity Страницы: 236
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Бренд: Opengear Страницы: 2
Ruckus Wireless SmartZone 3.6 Command Reference Manual preview
SmartZone 3.6
Бренд: Ruckus Wireless Страницы: 102
Accton Technology Fast SwitchHub-8mi SNMP Advanced Reference Manual preview
Fast SwitchHub-8mi SNMP
Бренд: Accton Technology Страницы: 13
Watchguard Firebox T20-W Quick Start Manual preview
Firebox T20-W
Бренд: Watchguard Страницы: 40
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Бренд: NETGEAR Страницы: 84
Netis DL4305 Quick Installation Manual preview
DL4305
Бренд: Netis Страницы: 16
E-TOP PR126g User Manual preview
PR126g
Бренд: E-TOP Страницы: 24
Intellinet 561051 Quick Install Manual preview
561051
Бренд: Intellinet Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды