D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
22
Cisco TelePresence MX200 G2 and MX300 G2
Administrator Guide
Sign in to the web interface, and navigate to
Configuration >
System Configuration
.
Find a system setting
Search for settings
Enter as many letters as needed in the search field. All settings
that contain these letters are shown in the right pane. Settings
that have these letters in their value space are also shown.
Change a system setting
Check the value space
A settings’s value space is specified either by text following
the input field or in a drop-down list that opens when you
click the arrow.
System configuration
About system settings
All system settings can be changed from
the web interface.
Each system setting is described in the
chapter.
Different settings may require different
user credentials. In order to be sure that
an administrator is able to change all
system settings, an administrator user
must possess all user roles.
You can read more about user
administration and user roles in the
chapter.
Select a category and navigate to settings
The system settings are grouped in categories. Choose a
category in the left pane to show the associated settings.
Change a value
1. Choose the preferred value from the drop-down list, or
enter new text in the input field.
2. Click
Save
for the change to take effect.
Use the
Undo
or
Cancel
buttons if you do not want to
make any changes.
Categories with unsaved changes are marked with an edit
symbol (
).
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Configuration
