7-13
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 7 Managing Service Class Templates
Managing Card SCTs
Managing Card SCTs
Card SCTs are used only on service modules. For instructions on managing card SCTs on service
modules, refer to the service module documentation, which is listed in
Managing PXM1E Port SCTs
The following sections describe how to manage PXM1E port SCTs using the following tasks:
•
Displaying the SCT Assigned to a Port
•
•
•
Note
For instructions on managing port SCTs on service modules, refer to the service module documentation,
which is listed in
.
minor
A 16-bit number which identifies the minor
version of the SCT. Each time an SCT file is
modified, saved, and downloaded, the minor
version number changes. A minor version change
does not require an upgrade or re-configuration of
the card and port database. However, the card
must be reset before the card can use the changed
SCT settings. The minor version of a file can be
deleted; therefore, the minor version number of a
file may not be in consecutive order from the
previous minor version of the same file.
checksum
An SCT identification number between 0 and
65535 that matches the checksum embedded in
the SCT file. The checksum number for all new
SCT files is advertised to the user through the
Release Notes for Cisco MGX 8850
(PXM1E/PXM45), Cisco MGX 8950, and Cisco
MGX 8830 Switches, Release 5.0.00 and the
Release Notes for the Cisco MGX 8880 Media
Gateway, Release 5.0.00.
status
Status of the SCT file on the switch. The status of
the SCT would be marked as “failed” if the file
does not exist or does not match the major and
minor versions.
description
Identifies whether the file is provided by Cisco
and displays the source filename.
Table 7-5
dspscts Command Display Components (continued)
Object
Description
