manualshive.com logo in svg

Cisco ME 1200 Series, Руководство по установке оборудования

Поделиться
Скачать
Cisco ME 1200 Series Скачать руководство пользователя страница 6

4

Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide

OL-31962-04

      

Related Publications

The safety warnings for this product are translated into several languages in the 

Cisco Regulatory 

Compliance and Safety Information for Cisco ME 1200 Series Carrier Ethernet Access Devices 

on 

Cisco.com. The EMC regulatory statements are also included in that guide.

Related Publications

These documents provide information about the switches and are available from this Cisco.com site:

http://www.cisco.com/c/en/us/support/switches/me-1200-series-carrier-ethernet-access-devices/tsd-pro
ducts-support-general-information.html

•

Release Notes for the Cisco ME 1200 Series Carrier Ethernet Access Devices 

Note

Before installing, configuring, or upgrading the switch, see the release notes on Cisco.com for 
the latest information.

•

Cisco ME 1200 Series Carrier Ethernet Access Devices Software Cisco NID Controller Guide 

•

Cisco Regulatory Compliance and Safety Information for Cisco ME 1200 Series Carrier Ethernet 
Access Devices

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a 
service request, and gathering additional information, see 

What’s New in Cisco Product Documentation

 

at: 

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

.

Subscribe to 

What’s New in Cisco Product Documentation

, which lists all new and revised 

Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a 
reader application. The RSS feeds are a free service.

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before 
you work on any equipment, be aware of the hazards involved with electrical circuitry and be 
familiar with standard practices for preventing accidents. Use the statement number provided 
at the end of each warning to locate its translation in the translated safety warnings that 
accompanied this device. 

Statement 1071

SAVE THESE INSTRUCTIONS

Содержание ME 1200 Series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды