Status
Reports
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
87
3
STEP 5
Click
Refresh Data
to update the data on the screen or click
Reset Data
to reset
the values to zero.
Reports of WAN Bandwidth
The WAN Bandwidth report displays the run-time WAN network bandwidth usage
by hour in the past 24 hours.
STEP 1
Click
Status -> Report -> WAN Bandwidth
.
STEP 2
Check the
Enable WAN Bandwidth
box to enable this report.
STEP 3
Click
Save
to save your settings.
STEP 4
After you enable this report, in the
Primary WAN
tab, you can see the run-time
network bandwidth usage for the primary WAN interface by hour in the past 24
hours.
STEP 5
If a secondary WAN interface is configured, in the
Secondary WAN
tab, you can
see the run-time network bandwidth usage for the secondary WAN interface by
hour in the past 24 hours.
STEP 6
Click
Reset
to reset the network bandwidth usages for both the primary WAN and
secondary WAN interfaces.
Reports of Security Services
The Security Services page displays the statistical information for all enabled
security services. To open the pages, click
Status -> Report -> Security
Services
. It includes the following sections:
•
Web Security Blocked Report, page 88
•
•
Email Security Report, page 89
•
Network Reputation Report, page 90
•
IPS Policy Protocol Inspection Report, page 90
•
