manualshive.com logo in svg

Cisco IOS XE, Руководство по настройке, Страница: 7 / 358

Поделиться
Скачать
Cisco IOS XE Скачать руководство пользователя страница 7

 

About Cisco IOS XE Software Documentation

Documentation Organization

v

 

Configuration Guides, Command References, and Supplementary Resources

Table 1

 lists, in alphabetical order, Cisco IOS XE software configuration guides and 

command references, including brief descriptions of the contents of the documents. The command 
references contain commands for both Cisco IOS software and Cisco IOS XE software, for all releases. 
The command references support many different software releases and platforms. Your Cisco IOS XE 
software release or platform may not support all these technologies.

Table 2 

lists documents and resources that supplement the Cisco IOS XE software configuration guides 

and command references. These supplementary resources include release notes and caveats; master 
command lists; new, modified, removed, and replaced command lists; system messages; and the debug 
command reference.

For additional information about configuring and operating specific networking devices, and to access 
Cisco IOS documentation, go to the Product/Technologies Support area of Cisco.com at the following 
location:

http://www.cisco.com/go/techdocs

 

Table 1

Cisco IOS XE Configuration Guides and Command References 

Configuration Guide and Command Reference Titles

Features/Protocols/Technologies

  •

Cisco ASR 1000 Series Aggregation Services Routers 
SIP and SPA Software Configuration Guide 

Configuration and troubleshooting of SPA interface processors 
(SIPs) and shared port adapters (SPAs) that are supported on the 
Cisco ASR 1000 Series Router. 

  •

Cisco ASR 1000 Series Aggregation Services Routers 
Software Configuration Guide 

Overview of software functionality that is specific to the 
Cisco ASR 1000 Series Aggregation Services Routers.

  •

Cisco IOS XE Access Node Control Protocol 
Configuration Guide 

  •

Cisco IOS Access Node Control Protocol 
Command Reference

Communication protocol between digital subscriber line access 
multiplexers (DSLAMs) and a broadband remote access server 
(BRAS).

  •

Cisco IOS XE Asynchronous Transfer Mode 
Configuration Guide

  •

Cisco IOS Asynchronous Transfer Mode 
Command Reference

LAN ATM, multiprotocol over ATM (MPoA), and WAN ATM.

  •

Cisco IOS XE Broadband Access Aggregation and DSL 
Configuration Guide 

  •

Cisco IOS Broadband Access Aggregation and DSL 
Command Reference 

PPP over Ethernet (PPPoE).

  •

Cisco IOS XE Carrier Ethernet Configuration Guide 

  •

Cisco IOS Carrier Ethernet Command Reference 

IEEE 802.3ad Link Bundling; Link Aggregation Control 
Protocol (LACP) support for Ethernet and Gigabit Ethernet links 
and EtherChannel bundles; LACP support for stateful 
switchover (SSO), in service software upgrade (ISSU), Cisco 
nonstop forwarding (NSF), and nonstop routing (NSR) on 
Gigabit EtherChannel bundles; and IEEE 802.3ad Link 
Aggregation MIB. 

  •

Cisco IOS XE Configuration Fundamentals 
Configuration Guide

  •

Cisco IOS Configuration Fundamentals 
Command Reference

Autoinstall, Setup, Cisco IOS command-line interface (CLI), 
Cisco IOS file system (IFS), Cisco IOS web browser user 
interface (UI), basic file transfer services, and file management.

Содержание IOS XE







































































































































































































































































































































































Отзывы:

Нет отзывов