manualshive.com logo in svg

Cisco IE 4000, Руководство по настройке программного обеспечения

Cisco IE 4000 - мощный промышленный коммутатор с поддержкой многофункциональных приложений. Вы можете загрузить бесплатно Руководство по аппаратной установке на нашем сайте. Получите детальное руководство для установки оборудования и настройки. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

275

   

Configuring VLANs

VLANs

Token Ring TrCRF VLANs

For more information on configuring Token Ring VLANs, see the 

Catalyst 6500 Series Software Configuration Guide

.

Normal-Range VLAN Configuration Guidelines 

Follow these guidelines when creating and modifying normal-range VLANs in your network:

The switch supports 1005 VLANs in VTP client, server, and transparent modes. 

Normal-range VLANs are identified with a number between 1 and 1001. VLAN numbers 1002 through 1005 are 
reserved for Token Ring and FDDI VLANs.

VLAN configuration for VLANs 1 to 1005 are always saved in the VLAN database. If the VTP mode is transparent, 
VTP and VLAN configuration are also saved in the switch running configuration file.

With VTP versions 1 and 2, the switch supports VLAN IDs 1006 through 4096 only in VTP transparent mode (VTP 
disabled). These are extended-range VLANs and configuration options are limited. Extended-range VLANs created 
in VTP transparent mode are not saved in the VLAN database and are not propagated. VTP version 3 supports 
extended range VLAN (VLANs 1006 to 4096) database propagation. If extended VLANs are configured, you cannot 
convert from VTP version 3 to version 1 or 2. See 

Creating an Extended-Range VLAN, page 285

.

Before you can create a VLAN, the switch must be in VTP server mode or VTP transparent mode. If the switch is a 
VTP server, you must define a VTP domain or VTP will not function.

The switch does not support Token Ring or FDDI media. The switch does not forward FDDI, FDDI-Net, TrCRF, or 
TrBRF traffic, but it does propagate the VLAN configuration through VTP.

The switch supports 128 spanning-tree instances. If a switch has more active VLANs than supported spanning-tree 
instances, spanning tree can be enabled on 128 VLANs and is disabled on the remaining VLANs. If you have already 
used all available spanning-tree instances on a switch, adding another VLAN anywhere in the VTP domain creates 
a VLAN on that switch that is not running spanning-tree. If you have the default allowed list on the trunk ports of that 
switch (which is to allow all VLANs), the new VLAN is carried on all trunk ports. Depending on the topology of the 
network, this could create a loop in the new VLAN that would not be broken, particularly if there are several adjacent 
switches that all have run out of spanning-tree instances. You can prevent this possibility by setting allowed lists on 
the trunk ports of switches that have used up their allocation of spanning-tree instances.

If the number of VLANs on the switch exceeds the number of supported spanning-tree instances, we recommend 
that you configure the IEEE 802.1s Multiple STP (MSTP) on your switch to map multiple VLANs to a single 
spanning-tree instance. For more information about MSTP, see 

Configuring MSTP, page 333

Default Ethernet VLAN Configuration

Note: 

The switch supports Ethernet interfaces exclusively. Because FDDI and Token Ring VLANs are not locally 

supported, you only configure FDDI and Token Ring media-specific characteristics for VTP global advertisements to other 
switches.

Содержание IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 4000

H3C RA100 Installation Manual preview
RA100
Бренд: H3C Страницы: 34
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Бренд: Grasslin Страницы: 2
B&B Electronics Parallel & Serial Port Checker PPC User Manual preview
Parallel & Serial Port Checker PPC
Бренд: B&B Electronics Страницы: 4
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Бренд: Allied Telesis Страницы: 1
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Бренд: Garderos Страницы: 23
Lancom 7100 VPN Manual preview
7100 VPN
Бренд: Lancom Страницы: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Бренд: Patton electronics Страницы: 12
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Бренд: X-Micro Страницы: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Бренд: Airlink101 Страницы: 13
Airlink101 AWMB100 User Manual preview
AWMB100
Бренд: Airlink101 Страницы: 46
T-COM Sinus 154 data II Quick Start Manual preview
Sinus 154 data II
Бренд: T-COM Страницы: 12
DIGIWEB Box 7360 Quick Setup Manual preview
Box 7360
Бренд: DIGIWEB Страницы: 16
Allied Telesis AT-AR3050S Installation Manual preview
AT-AR3050S
Бренд: Allied Telesis Страницы: 80
Conel LR77 v2 SL User Manual preview
LR77 v2 SL
Бренд: Conel Страницы: 32
Buffalo AirStation G54 WLA2-G54 Quick Setup Manual preview
AirStation G54 WLA2-G54
Бренд: Buffalo Страницы: 8
Paradyne SMD2000-24E Installation Instructions Manual preview
SMD2000-24E
Бренд: Paradyne Страницы: 28
SMC Sierra Monitor FPC-N38 Startup Manual preview
FPC-N38
Бренд: SMC Sierra Monitor Страницы: 43
Planet VR-300 Series User Manual preview
VR-300 Series
Бренд: Planet Страницы: 136

Бренды по названию

Популярные бренды

Загрузить еще бренды