manualshive.com logo in svg

Cisco IE 4000, Руководство по настройке программного обеспечения

Cisco IE 4000 - мощный промышленный коммутатор с поддержкой многофункциональных приложений. Вы можете загрузить бесплатно Руководство по аппаратной установке на нашем сайте. Получите детальное руководство для установки оборудования и настройки. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

273

   

Configuring VLANs

VLANs

Table 33

Port Membership Modes and Characteristics

For more detailed definitions of access and trunk modes and their functions, see 

Table 35 on page 278

.

When a port belongs to a VLAN, the switch learns and manages the addresses associated with the port on a per-VLAN 
basis. For more information, see 

Changing the Address Aging Time, page 115

.

Normal-Range VLANs

Normal-range VLANs are VLANs with VLAN IDs 1 to 1005. If the switch is in VTP server or VTP transparent mode, you 
can add, modify or remove configurations for VLANs 2 to 1001 in the VLAN database. (VLAN IDs 1 and 1002 to 1005 
are automatically created and cannot be removed.) 

Configurations for VLAN IDs 1 to 1005 are written to the 

vlan.dat 

file

 

(VLAN database), and you can display them by 

entering the 

show vlan

 privileged EXEC command. The 

vlan.dat

 file is stored in flash memory. 

Caution: 

You can cause inconsistency in the VLAN database if you attempt to manually delete the 

vlan.dat

 file. If you 

want to modify the VLAN configuration, use the commands described in these sections. 

Membership Mode

VLAN Membership Characteristics

VTP Characteristics

Static-access

A static-access port can belong to one VLAN and is 
manually assigned to that VLAN. 

For more information, see 

Assigning Static-Access Ports 

to a VLAN, page 285

. 

VTP is not required. If you do not want VTP 
to globally propagate information, set the 
VTP mode to transparent. To participate in 
VTP, there must be at least one trunk port 
on the switch connected to a trunk port of 
a second switch.

Trunk (ISL or 
IEEE 802.1Q) 

A trunk port is a member of all VLANs by default, including 
extended-range VLANs, but membership can be limited 
by configuring the allowed-VLAN list. You can also modify 
the pruning-eligible list to block flooded traffic to VLANs 
on trunk ports that are included in the list.

For information about configuring trunk ports, see 

Configuring an Ethernet Interface as a Trunk Port, 
page 286

.

VTP is recommended but not required. 
VTP maintains VLAN configuration 
consistency by managing the addition, 
deletion, and renaming of VLANs on a 
network-wide basis. VTP exchanges VLAN 
configuration messages with other 
switches over trunk links.

Dynamic access

A dynamic-access port can belong to one VLAN and is 
dynamically assigned by a VMPS (VLAN Membership 
Policy Server). The VMPS can be a Catalyst 5000 or 
Catalyst 6500 series switch, for example, but never an 
IE 2000 switch. The IE 2000 switch is a VMPS client.

You can have dynamic-access ports and trunk ports on 
the same switch, but you must connect the 
dynamic-access port to an end station or hub and not to 
another switch.

For configuration information, see 

Configuring 

Dynamic-Access Ports on VMPS Clients, page 290

.

VTP is required. 

Configure the VMPS and the client with the 
same VTP domain name. 

To participate in VTP, at least one trunk port 
on the switch must be connected to a trunk 
port of a second switch.

Voice VLAN 

A voice VLAN port is an access port attached to a Cisco 
IP Phone, configured to use one VLAN for voice traffic and 
another VLAN for data traffic from a device attached to the 
phone. 

For more information about voice VLAN ports, see 

Configuring Voice VLAN, page 309

VTP is not required; it has no effect on a 
voice VLAN.

Содержание IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 4000

2N OfficeRoute Quick Manual preview
OfficeRoute
Бренд: 2N Страницы: 11
2N stargate How To Set preview
stargate
Бренд: 2N Страницы: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Бренд: 2N Telekomunikace Страницы: 24
REXROTH efc series Instruction Manual preview
efc series
Бренд: REXROTH Страницы: 68
APM AQ-500h Specification Sheet preview
AQ-500h
Бренд: APM Страницы: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Бренд: Patton electronics Страницы: 23
Dazzle Hollywood DV-Bridge User Manual preview
Hollywood DV-Bridge
Бренд: Dazzle Страницы: 63
KonNad SinoCon C2000-C2-SHK0401-BB1 User Manual preview
SinoCon C2000-C2-SHK0401-BB1
Бренд: KonNad Страницы: 12
Comet Labs GS8+ User Manual preview
GS8+
Бренд: Comet Labs Страницы: 11
Idis DR-6316PS-S Quick Manual preview
DR-6316PS-S
Бренд: Idis Страницы: 16
EXAGATE SYSGuard 6001 Quick Installation Manual preview
SYSGuard 6001
Бренд: EXAGATE Страницы: 7
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Бренд: PairGain Страницы: 7
Tripp Lite SmartRack SR42UBEXPKD Assembly Instructions Manual preview
SmartRack SR42UBEXPKD
Бренд: Tripp Lite Страницы: 8
ATCOM AXE2DL + EC64L User Manual preview
AXE2DL + EC64L
Бренд: ATCOM Страницы: 18
ICP DAS USA PDS-734 Quick Start Manual preview
PDS-734
Бренд: ICP DAS USA Страницы: 8
WEIGL Nanotec Instruction Manual preview
Nanotec
Бренд: WEIGL Страницы: 6
Planet FGSW-4840S User Manual preview
FGSW-4840S
Бренд: Planet Страницы: 38
NETGEAR AirBridge WBC502 User Manual preview
AirBridge WBC502
Бренд: NETGEAR Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды