Cisco IE 3010, Руководство по установке

Страница: 15 / 30

31
Switch Installation
Installing the Switch
Attaching Brackets
Figure 20 Attaching 19-inch Rack Brackets
Attaching Brackets for IP-30 Compliance (Optional)
1. Insert the rubber plugs in the appropriate holes on both sides of the switch. See Figure 21 on page 32 .
Note: The rubber plugs are not supplied with the switch. You can order a kit (part number IE-3010-IP30KIT)
containing the rubber plugs.
2. Use a screwdriver or pen to completely push in the rubber plugs. See Figure 12 on page 22 .
3. Install the brackets on both sides of the switch. See Figure 22 on page 32 .
1 Phillips truss-head screws
Ci
sc
o Sw
it
ch
Se
ri
es
IE
3010
208368
1