16
Release Notes for the Cisco IE 2000 Switches, Cisco IOS Release 15.2(1)EY
NEW DOC # PENDING
Open Caveats
Open Caveats
Note
You can click the issue number to view more information in the Cisco Bug Search tool (login required).
Caveats Resolved in This Release
Note
You can click the issue number to view more information in the Cisco Bug Search tool (login required).
Issue
Description
CSCue28976
The
show l2nat statistics
command
shows that total packets is less than the
translated packets after running the traffic for few days.
Work Around:
There is no workaround.
CSCuh36550
When
power inline wattage max
value
is configured at the global
configuration level. The switch will print the error messages during boot up if
value
is not the default value (65 watts)
Work Around:
There is no operational impact and there is no workaround
CSCtx35101
The password must be entered twice before it is accepted in Express Setup.
Work Around:
There is no workaround.
CSCum76147
No warning for Port Security Settings changes displayed via Device Mgr.
Work Around:
There is no workaround.
CSCum67722
Maximum mac address range should vary according to the SDM template
settings on the Eiskaffee. Maximum unicast mac address range is not similar to
CLI. In Eiskaffee for all the SDM template its shows as 8192 as maximum mac
range, which is incorrect.
Work Around:
There is no workaround.
CSCum76505
Eiskaffee-S4P3-channel number beyond the limit not working as expected
Work Around:
There is no workaround.
Issue
Descripton
CSCui48101
When the power mode on a PoE interface is set to static, the port may go to
err-disable if sufficient power is not available.
Work Around:
Use the default auto mode by entering the
power inline auto
command.
