Cisco IAD2801 Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 79

background image

xvii

Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide

OL-12433-01

Preface

Product Alerts and Field Notices

Product Alerts and Field Notices

Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field
Notices. You can receive these announcements by using the Product Alert Tool on Cisco.com. This tool
enables you to create a profile and choose those products for which you want to receive information.

To access the Product Alert Tool, you must be a registered Cisco.com user. Registered users can access
the tool at this URL:

http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en

To register as a Cisco.com user, go to this URL:

http://tools.cisco.com/RPF/register/register.do

Obtaining Technical Assistance

Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The
Cisco Support website on Cisco.com features extensive online support resources. In addition, if you
have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide
telephone support. If you do not have a valid Cisco service contract, contact your reseller.

Cisco Support Website

The Cisco Support website provides online documents and tools for troubleshooting and resolving
technical issues with Cisco products and technologies. The website is available 24 hours a day at
this URL:

http://www.cisco.com/en/US/support/index.html

Access to all tools on the Cisco Support website requires a Cisco.com user ID and password. If you have
a valid service contract but do not have a user ID or password, you can register at this URL:

http://tools.cisco.com/RPF/register/register.do

Note

Before you submit a request for service online or by phone, use the

Cisco Product Identification Tool

to locate your product serial number. You can access this tool from the Cisco Support website
by clicking the

Get Tools & Resources

link, clicking the

All Tools (A-Z)

tab, and then choosing

Cisco Product Identification Tool

from the alphabetical list. This tool offers three search options:

by product ID or model name; by tree view; or, for certain products, by copying and pasting

show

command output. Search results show an illustration of your product with the serial number label
location highlighted. Locate the serial number label on your product and record the information
before placing a service call.

Tip

Displaying and Searching on Cisco.com

If you suspect that the browser is not refreshing a web page, force the browser to update the web page
by holding down the Ctrl key while pressing

F5

.

To find technical information, narrow your search to look in technical documentation, not the
entire Cisco.com website. After using the Search box on the Cisco.com home page, click the

«
...
17
18
19
20
21
...
»

Содержание IAD2801 Series
















































































Отзывы:

Нет отзывов

Похожие инструкции для IAD2801 Series

DES-3526 - Switch - Stackable

Бренд: D-Link Страницы: 258

Бренд: 2N Страницы: 11

Бренд: 2N Страницы: 5

Бренд: 2N Telekomunikace Страницы: 24

Бренд: National Instruments Страницы: 24

Бренд: National Instruments Страницы: 32

FIELDPOINT FP-1600

Бренд: National Instruments Страницы: 8

Бренд: APM Страницы: 3

Бренд: Patton electronics Страницы: 23

Бренд: RAIDAGE Страницы: 60

Бренд: ICP DAS USA Страницы: 8

Бренд: National Instruments Страницы: 130

LinkStation Mini

Бренд: Buffalo Страницы: 71

Бренд: ANEP Страницы: 48

Elinx EIR510 Series

Бренд: B&B Electronics Страницы: 2

Бренд: Casablanca Страницы: 13

Бренд: RR-Concepts Страницы: 12

Бренд: ACTi Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды