Cisco D9824, Руководство по установке и настройке

Страница: 390 / 416

Appendix B
Default Settings and Lock Levels
368
Factory Default Settings and Lock Levels
The D9824 Advanced Multi Decryption Receiver is factory configured with default
settings, unless you have requested a custom factory configuration.
The following table lists the lock levels available for protecting your receiver and its
settings against unauthorized use or modification:
Level Description
0 All settings are unlocked (receiver lockout disabled)
1 All settings are unlocked except Factory Reset,
Password options and receiver parameters.
2 All settings are unlocked except RF and ASI Input
Tuning parameters.
3 All settings locked (access via password only), except IP
address and RF power.
4 All settings locked (can be changed via PNC uplink
signal only)
If a change made to the current Lock Level setting is not saved, the previously save d setting
is restored.
Administration
Parameter Default Setting Default Lock Level
Lock Level 0 3
Password 1234 3
Old Pwd, New Pwd, Confirm
Pwd N/A 0
Factory Reset N/A 0
Clear FWD Tables N/A 0
KB Lock Disable 2
KB Lock Timeout 60 2
LCD Contrast 30 2
DL Mode Always 2
Type None N/A
Bank App 5514 N/A
Date Format YYY_MM_DD 2