7
5
Install Design Studio
Design Studio is the application that creates transformation rules. You also use Design Studio to
customize the default ScreenTop Menu that serves as a portal for devices connecting to the CTE.
Requirements
Design Studio requires the following:
•
Windows 95, Windows 98/ME, Windows 2000, or Windows NT 4.0 with Service Pack 6.
•
At least 25 MB of disk space.
•
At least 128 MB of RAM; 256 MB is recommended.
•
Internet Explorer version 5.0 or higher, or Netscape Navigator version 4.01 or higher.
•
A VGA color monitor with a graphics card capable of showing 16-bit color or higher. A minimum
screen resolution of 640 x 480
. Recommended resolution is
1280 x 1024.
•
Network connection to the CTE.
The network connection can be through a proxy server, which you specify when you log in to
Design Studio.
Procedure
To install Design Studio, perform these steps:
Step 1
Insert the Design Studio CD-ROM into your CD-ROM drive.
If auto-start is enabled on your computer, the installer starts.
If auto-start is not enabled on your computer, double-click the drive icon for your CD-ROM,
and then double-click CiscoCTEDesignStudio.exe.
Step 2
Follow the instructions in the installer.
You may be asked to restart your PC during the installation. After you restart your PC, the
Design Studio installation wizard continues the installation.
By default, Design Studio is installed in C:\Program Files\Cisco\CTE\Design Studio.
Next
Continue to the next section to start Design Studio.
