SUMMARY STEPS
1.
On the Server Manager, select
Dashboard
to configure the local server.
2.
Select
Manager
from the top right, and then select
Add Roles and Features
from the drop-down menu.
3.
Click
Next
.
4.
Select
Server Roles
. In the Roles list, select the following options by clicking on the checkbox:
5.
Select Features. In the Features list, select the following option by clicking on the checkbox:
6.
Click
Next
.
DETAILED STEPS
Step 1
On the Server Manager, select
Dashboard
to configure the local server.
Step 2
Select
Manager
from the top right, and then select
Add Roles and Features
from the drop-down menu.
The
Add Roles and Features Wizard opens.
Step 3
Click
Next
.
Step 4
Select
Server Roles
. In the Roles list, select the following options by clicking on the checkbox:
•
File and Storage Services
•
Hyper-V
Step 5
Select Features. In the Features list, select the following option by clicking on the checkbox:
•
Failover Clustering
Failover clustering is required. It is not automatically installed, so you must make sure this option is checked. This feature
requires that Failover Cluster Manager is installed.
Step 6
Click
Next
.
Creating the VM
To create the VM, perform the following steps:
SUMMARY STEPS
1.
In Hyper-V Manager, click on the host.
2.
Select
New > Virtual Machine
.
3.
Click
Specify Name and Location.
4.
On the
Assign Memory
screen, enter the
Startup Memory
value.
5.
On the
Configure Networking
screen, select a network connection to the virtual switch that was previously
created.
6.
On the
Connect Virtual Hard Disk Screen
, select the following option:
7.
Review the VM settings, and if correct, click
Finish
.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
138
Installing the Cisco CSR 1000v in Microsoft Hyper-V Environments
Creating the VM
