v
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Preface
Overview
This document describes how to install the Cisco Multiservices Platform Series devices and how to
perform the initial set up of these devices. It provides information for the following Multiservices
Platform Series model:
•
CPS-MSP-1RU-K9—1-rack unit (RU) chassis with motherboard, 300 W power supply, and CPU.
(Drives and option cards are available separately.)
•
CPS-MSP-2RU-K9—2-rack unit (RU) chassis with motherboard, 900 W power supply, and CPU.
(Drives are available separately.)
This document it is intended for experienced system integrators and technicians who are installing these
devices.
Organization
This document is organized as follows:
Provides information about the Multiservices
Platform Series features, chassis, and system
interface
Chapter 2, “Setting Up and Maintaining the
Multiservices Platform Series Device”
Describes how to perform a variety of set up and
hardware maintenance procedures for Multiservices
Platform Series devices
Appendix A, “System Specifications”
Provides technical specifications for the
Multiservices Platform Series, including connection
ports, power needs and operating environment
requirements
Appendix B, “Recovering from a Hard Drive
Failure”
Describes how to replace and reimage a failed hard
disk drive
Appendix C, “Fiber Channel Card”
Provides information about the optional fiber channel
card, which enables fibre channel connectivity to
external storage arrays
