B-7
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Appendix B Recovering from a Hard Drive Failure
Reimaging a Multiservices Platform Series Device that is Running Cisco PAM
b.
Press
F10
to configure.
c.
Press
Spacebar
to choose SPAN-1.
d.
Press
F10
to continue.
e.
Specify
RAID = 0
.
f.
Choose
Accept
and press
Enter
.
g.
Press
Esc
to leave configuration mode and
Yes
to save the configuration.
h.
Press
Esc
again.
Step 15
Press
Esc
to return to the Management menu.
Step 16
Press
Esc
to exit and
Yes
to confirm.
Step 17
Insert the operating system disc for your release of Cisco IPICS and press
Ctrl-Alt-Del
to reboot
Note
If you are using the 1-RU Multiservices Platform Series model, you need to attach a USB DVD
drive.
When the system reboots, the operating system installation process begins. See
Cisco IPICS Server
Installation and Upgrade Guide Release
for your release of Cisco IPICS for detailed information about
installing the operating system.
Reimaging a Multiservices Platform Series Device that is
Running Cisco PAM
Reimaging a Multiservices Platform Series Device that is running Cisco PAM involves reconfiguring
RAID to make replacement hard drives visible to a server and resetting the server to the factory defaults.
Before reimaging a server, replace the failed hard drive.
To reimage a server, see the “Reinstalling the Cisco PAM Server Software from a Recovery CD” section
in
Cisco Physical Access Manager User Guide
for your release of Cisco PAM.
