manualshive.com logo in svg

Cisco CPA2501, Руководство пользователя, Страница: 13 / 138

Поделиться
Скачать
Cisco CPA2501 Скачать руководство пользователя страница 13

 Overview of the Router 1-9

Ordering Documentation

For a copy of CCO’s Frequently Asked Questions (FAQ), contact [email protected]. For
additional information, contact [email protected].

Note

If you need technical assistance with a Cisco product that is under warranty or

covered by a Cisco maintenance contract, contact Cisco’s Technical Assistance Center
(TAC) at 800 553-2447, 408 526-7209, or [email protected].

Please use CCO to obtain general information about Cisco Systems, Cisco products, or
upgrades. If CCO is not accessible, contact 800 553-6387, 408 526-7208, or
[email protected].

Ordering Documentation

Documentation for Cisco products is available in three forms: on a CD-ROM, printed
books, and on the World Wide Web. You have the option of subscribing to the
documentation CD through an update service. Or you can order printed documentation at
an additional cost. Refer to the information packet included with the router for detailed
ordering information. You can also access Cisco documentation on the World Wide Web
URL http://www.cisco.com.

Содержание CPA2501











































































































































Отзывы:

Нет отзывов