Cisco Cisco ONS 15600 SDH, Руководство по устранению неисправностей

Страница: 230 / 318

2-122
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 2 Alarm Troubleshooting
2.8 Frequently Used Alarm Troubleshooting Procedures
2.8 Frequently Used Alarm Troubleshooting Procedures
This section gives common procedures that are frequently used when troubleshooting alarms. Most of
these procedures are summarized versions of more detailed procedures in the
Cisco ONS 15600 SDH
Procedure Guide .
2.8.1 Node and Ring Identification, Change, Visibility, and Termination
The following procedures relate how to identify or change MS-SPRing names and node IDs, and how to
verify visibility from other nodes.
Identify an MS-SPRing Ring ID or Node ID Number
Step 1 In node view, click View > Go to Network View .
Step 2
Click the Provisioning > MS-SPRing tabs.
Step 3 From the Ring ID column, record the Ring ID, or in the nodes column, record the Node IDs in the
MS-SPRing. The Node IDs are the numbers in parentheses next to the node name.
Change an MS-SPRing Ring ID Number
Step 1
In node view, click View > Go to Network View .
Step 2
Click the Provisioning > MS-SPRing tabs.
Step 3
Highlight the ring and click Edit .
Step 4
In the MS-SPRing window, enter the new ID in the Ring ID field.
Step 5 Click Apply .
Step 6
Click Yes in the Changing Ring ID dialog box.
Change an MS-SPRing Node ID Number
Step 1 In node view, click View > Go to Network View .
Step 2
Click the Provisioning > MS-SPRing tabs.
SRV LED Green The service mode of the card; green indicates that the card is in use and
no light indicates that the card can be removed for service.
LASER ON Green The green LASER ON LED indicates that at least one of the card’s lasers
is active.
Table 2-16 STM-N Card-Level Indicators (continued)
Indicators Color Description