Cisco Cisco 7940, Руководство пользователя

Страница: 81 / 186

Managing the Selective Caller List
Cisco 7960/7940 Telephone User Guide System Telephone Features 69
620-05600070B
Managing the Selective Caller List
Your 10-digit Selective Call List access codes are managed using the keypad on
your telephone. You can change the codes at any time and can listen to the
numbers you have programmed. You can delete numbers from the list which will
end their ability to call you, change the numbers, or to remove an old or no longer
used number so you can add new numbers.
Adding to the List
1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 4 to add numbers to the Selective Call List.
4. Enter the number by pressing the desired digit keys on the telephone keypad.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.
NOTE: If you try to add a number when you already have 10 numbers, a prompt tells you
the list is full, no more numbers can be added and that a number must be deleted
to add a new number.
Listening to the List
1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 5 to hear the numbers in the Selective Call List.
4. The first number in the Selective Call List is played.
5. Press # to hear the next number.
Continue pressing # until you have heard all the numbers. When you reach
the end of the list, the system will take you back to the beginning of the list.