Cisco Cisco 7940 Скачать руководство пользователя страница 35

Страница: 35 / 186

Deleting an Abbreviated Dial Code

Cisco 7960/7940 Telephone User Guide

System Telephone Features

620-05600070B

NOTE:

Be sure to enter all the numbers normally required to dial the call. This includes

the area code for long distance calls and may include the area code for local calls
in some areas.

Press

to save the changes or

to exit without saving.

Program or verify another Abbreviated Dial code or hang up to exit.

Deleting an Abbreviated Dial Code

Press

75*

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

A voice prompt will lead you through the remaining steps.

Press

to program (set) the Abbreviated Dial code (00-99).

Press the digits of the Abbreviated Dial code to delete followed by the

sign.

A confirmation message tells you: “No number was entered.”

Program or verify another Abbreviated Dial code or hang up to exit.

Verifying an Abbreviated Dial Number

Press

75*

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

Press

to verify (check) an Abbreviated Dial code (00-99).

Press the Abbreviated Dial code you wish to verify.

The phone number you entered for this Abbreviated Dial number is repeated
back.

Program or verify another Abbreviated Dial code or hang up to exit.

Anonymous Call Rejection

When enabled, this feature rejects calls from callers who block the display of their
caller ID information.

Enabling Anonymous Call Rejection

Press

*77

on the telephone keypad.

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

Hang up.

On any subsequent incoming call that provides no caller ID, the calling party gets
a message that the party they are calling does not accept anonymous calls.

Содержание Cisco 7940



























































































































































































Результаты поиска

Содержание Cisco 7940

Отзывы:

Похожие инструкции для Cisco 7940

Бренды по названию

Популярные бренды

Cisco Cisco 7940, Руководство пользователя

Результаты поиска

Содержание Cisco 7940

Отзывы:

Похожие инструкции для Cisco 7940

Бренды по названию

Популярные бренды