Cisco CGR2010 Скачать руководство пользователя страница 1

Страница: 1 / 30

Cisco Systems, Inc.

www.cisco.com

Installing and Connecting the Router

This section describes how to install and connect Cisco CGR 2010 routers to a LAN or WAN, as well as how to connect
AC or DC power to the router.

These topics are discussed.



What you Need to Know, page 26



Before You Begin, page 27



Unpacking the Router, page 27



Installing the Router in a Rack, page 27



Power-Supply Modules, page 30



Connecting to a Console Terminal or Modem, page 38



Installing the Cisco Microsoft Windows USB Device Driver, page 41



Uninstalling the Cisco Microsoft Windows USB Driver, page 42



Connecting to the Auxiliary Port, page 43



Connecting WAN and LAN Interfaces, page 44



Auxiliary Port, Console Port, and Adapter Pinouts for the Cisco CGR 2010 Router, page 45



Connectors and Cabling for the 8-Port Asynchronous/ Synchronous RS-232 GRWIC, page 51

Note:

To see translations of the warnings that appear in this publication, see

Cisco Connected Grid Routers Series

Regulatory Compliance and Safety Information

Caution:

For the optimum temperature ranges, do not operate it in an area that less than the minimum of 40°C and

exceeds a maximum recommended ambient temperature of 60°C.

Note:

To view specifications for the CGR 2010 router, see the Cisco 2010 Connected Grid Router data sheet at:

http://www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/data_sheet_c78_593509.html

Warning:

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

Warning:

This unit might have more than one power supply connection. All connections must be removed to

de-energize the unit. Statement 1028

Warning:

Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or

ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end
away from the unit first. Statement 1026

Warning:

Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub,

in a wet basement, or near a swimming pool. Statement 1035

Содержание CGR2010































Результаты поиска

Содержание CGR2010

Отзывы:

Похожие инструкции для CGR2010

Бренды по названию

Популярные бренды

Cisco CGR2010, Установка и подключение

Результаты поиска

Содержание CGR2010

Отзывы:

Похожие инструкции для CGR2010

Бренды по названию

Популярные бренды