Cisco CGR 1240, Инструкция по монтажу

Страница: 4 / 26

52
Figure 24 Mounting Bracket Kit Contents—Required Parts
Band Strap Kit
Use the straps in the Band Strap Kit when you mount the router on a pole larger than 4.5 inches (11.4 cm) in diameter.
This installation also requires the pole mount kit and strap tool kit. See
Pole Mount Kit, page 50 and Strap Tool Kit,
page 53 .
Item Name Qty. Description
1 Mounting bracket 1 Mounts router to mounting plate, which is installed on pole.
2 Mounting bracket security panel
(optional) 1 Optional bracket feature, which prevents the unauthorized users
from removing the router from the mounting bracket.
Included Hardware
3 Washer (M8) 12 Use this hardware to attach the mounting bracket to the mounting
plate, and the router to the mounting bracket. Assemble the
washer, split lock washer, and bolt as described in
Assemble
Bracket Hardware, page 59 .
4 Split lock washer (M8) 12
5 Bolt (M8 x 1.25) 12
6 Serrated nut (M8 x 1.25) 1
7 Security panel screws (8-32) 3 Use these screws to attach the security panel to the mounting
bracket.
Included Hardware
Qty 12
3
Qty 12
4
Qty 4
6
Qty 12
5
Qty 4
7
2 1
300603