Cisco Catalyst 4500 Series Скачать руководство пользователя страница 1197 | Manualshive

Страница: 1197 / 2086

Cisco Catalyst 4500 Series Скачать руководство пользователя страница 1197

45-3

Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex

Chapter 45 Configuring AVC with DNS-AS

About AVC with DNS-AS

Client or DNS-AS client

Networking devices throughout your network. Host traffic is always
routed through such a client.

Note

This configuration chapter deals with DNS-AS configuration
on Cisco Catalyst Switches that are deployed as access
switches only. Throughout this document, the term client,
DNS-AS client, refers to the switch where AVC with DNS-AS
is enabled.

DNS-AS Clients receive metadata from an authoritative DNS server
and maintain a database of this information in the form of records.
How long the record remains in the client’s database, is determined by
the record’s TTL.

Binding table

A table that resides in the client and serves as a database of parsed
DNS server responses [TXT records and “A” records].

Every client has a binding table of its own.

An “A” record

A record containing the domain name and IP address information
[Only IPv4 address]. This is one of the DNS-Server responses (the
other being the TXT record) and has a predefined lifespan.

A forward lookup request from a host is a request for an “A” record.

TXT DNS-AS resource
record or TXT record

A record containing metadata. This is one of the DNS-Server
responses (the other being the “A” record) and has a predefined
lifespan.

A TXT record is limited to 255 characters.

For AVC with DNS-AS, the TXT attribute is always

CISCO-CLS

. Any

TXT record that starts with

CISCO-CLS=

can be recognized as a

DNS-AS message.

Syntax—

CISCO-CLS=<option>:<val>{|<option>:<val>}*

Time-to-Live (TTL)

The lifespan of an “A” record and TXT record in the binding table.

TTL values are configured on the DNS server.

While a TTL accompanies both TXT and “A” record responses, the
DNS client only goes by the “A” record response from the DNS server.

Authoritative DNS server

The go-to DNS server for all client metadata and “A” record requests.

Every DNS domain has only one authoritative DNS server.

Such a server maintains records of application metadata in the form of
a TXT record, and only returns responses to queries about domain
names that have been maintained in the required format.

The following is a sample metadata record in the prescribed format:

CISCO-CLS=app-name:example|app-class:TD|business:YES|app-i

d:CU/28202

«
...
1195
1196
1197
1198
1199
...
»

Содержание Catalyst 4500 Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов