Cisco Catalyst 3650 Series, Справочник по командам

Страница: 847 / 1108

show radius server-group
To display properties for the RADIUS server group, use the show radius server-group command.
show radius server-group
{ name |
all
}
Syntax Description
Name of the server group. The character string used to name the group of servers must
be defined using
the aaa group server radius
command.
name
Displays properties for all of the server groups.
all
Command Modes
User EXEC
Privileged EXEC
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the show radius server-group command to display the server groups that you defined by using the aaa
group server radius command.
Examples This is an example of output from the
show radius server-group all
command:
Device# show radius server-group all
Server group radius
Sharecount = 1 sg_unconfigured = FALSE
Type = standard Memlocks = 1
This table describes the significant fields shown in the display.
Table 41: show radius server-group command Field Descriptions
Description Field
Name of the server group. Server group
Number of method lists that are sharing this server
group. For example, if one method list uses a
particular server group, the sharecount would be 1.
If two method lists use the same server group, the
sharecount would be 2. Sharecount
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
821
show radius server-group