Cisco Catalyst 3650 Series, Справочник по командам

Страница: 281 / 1108

show ip igmp snooping groups
To display the Internet Group Management Protocol (IGMP) snooping multicast table for the device or the
multicast information, use the
show ip igmp snooping groups privileged EXEC command.
show ip igmp snooping groups
[
vlan vlan-id
] [[
count
] | ip_address ]
Syntax Description
(Optional) Specifies a VLAN; the range is 1 to 1001 and 1006 to 4094. Use this
option to display the multicast table for a specified multicast VLAN or specific
multicast information.
vlan vlan-id
(Optional) Displays the total number of entries for the specified command options
instead of the actual entries.
count
(Optional) Characteristics of the multicast group with the specified group IP address. ip_address
Command Modes
Privileged EXEC
User EXEC
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not
appear, but the lines that contain Output appear.
Examples This is an example of output from the show ip igmp snooping groups command without any keywords. It
displays the multicast table for the device:
Device# show ip igmp snooping groups
Vlan Group Type Version Port List
-------------------------------------------------------------
1
224.1.4.4 igmp Gi1/0/11
1 224.1.4.5 igmp Gi1/0/11
2 224.0.1.40 igmp v2 Gi1/0/15
104 224.1.4.2 igmp v2 Gi2/0/1, Gi2/0/2
104 224.1.4.3 igmp v2 Gi2/0/1, Gi2/0/2
This is an example of output from the
show ip igmp snooping groups count
command. It displays the total
number of multicast groups on the device:
Device#
show ip igmp snooping groups count
Total number of multicast groups: 2
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
255
show ip igmp snooping groups